Scrap Week Recap: Copper Cools
Market notes · Published

The copper market led the scrap week of November 9 to 13, 2026. On Thursday, the London benchmark price for copper touched its lowest point in four months, and aluminum slipped with it. This recap also covers a new Honda plant planned for Ohio and two stainless steel stories from Pennsylvania and Alabama. Every figure names its source and its date, and nothing here is a forecast of your yard's board.
The week in four lines
Four pieces of news mattered this week, and the card below puts them on one page.

Here is the same week in words:
- Copper market: London copper fell 1.5 percent on Thursday and touched $13,515, its lowest level since July 20 (Reuters, November 12).
- Aluminum: the London aluminum price also fell 1.5 percent the same day (Reuters, November 12).
- Honda: a planned $3 billion auto plant in Ohio, with production from 2029 (Recycling Today, November 12).
- Stainless: a new stainless scrap site near Pittsburgh, and a stainless maker back in profit on stronger sales in the Americas (Recycling Today, November 11).
Get the app
Free.
The copper market hits a four-month low
Reuters reported on Thursday, November 12, that the three-month copper price on the London Metal Exchange was down 1.5 percent at $13,610 a metric ton late in the London afternoon. Earlier in the day it touched $13,515, the weakest level since July 20. A metric ton is about 2,205 pounds, so $13,610 works out to roughly $6.17 a pound.
The report gave three reasons for the slide in the copper market. Demand for copper was weak. A selloff in artificial intelligence stocks weighed on the metal. And officials at the Federal Reserve did not rule out a rate hike at the December meeting, which the report said could mean further gains for the dollar. A stronger dollar makes metals priced in dollars cost more for buyers who pay in other money, and that tends to pull prices down.
What the U.S. copper market did
The U.S. price to watch is COMEX copper, the futures contract traded in New York. Per the CME Group settlements, the December contract settled at $6.2375 a pound on Friday, November 6. It rose to $6.3445 on Monday, fell back to $6.2345 on Tuesday and closed at $6.2900 on Wednesday, November 11. That is up about 5 cents for the week through Wednesday, before the London drop on Thursday.
So the U.S. copper market swung by about a dime on Monday and again on Tuesday, then ended Wednesday close to where it started. The London slide came after that close.
Exchange prices are not your yard's number
Every number above is an exchange price for refined copper, the pure metal in big lots. It is not a scrap price and it is not what any yard will pay you. Your yard pays for your grade, on your day, after its own costs for sorting, handling and freight, and its board moves on its own schedule.
Think of the exchange price as the weather report and your yard's board as what you feel when you step outside. A cold front in London can take days to reach your yard, and sometimes it blows over before it gets there. A weak day in the copper market is a reason to call before you drive, not a reason to sell in a hurry or to sit on your metal for weeks.
Scrap tip: When the copper market swings, grade is what you control. Keep bare bright wire, number one and number two copper and insulated wire in separate buckets, and ask your yard for each price by name. Mixed copper gets paid at the lowest grade in the bucket.
Aluminum followed copper down

The same Reuters report put three-month aluminum on the London exchange down 1.5 percent at $3,022 a metric ton on Thursday, or roughly $1.37 a pound. That is a price for new primary aluminum, not scrap, and it moved in step with the copper market that day.
The report also noted that aluminum stocks in London warehouses stood at 226,350 tons, down nearly 56 percent since January. Our reading: fewer tons sitting in warehouses usually means buyers are using the metal as fast as it arrives. That is one week's reading, and it does not tell you what your yard will pay for cans or extrusions. It does tell you the aluminum market was not flooded with metal when the price dipped.
Related reading: Copper also led our recap two weeks ago, when COMEX copper rose early in the week and fell late. Our scrap week recap for October 26 to 30 has those settlements to compare against this week's copper market moves.
Honda plans a $3 billion plant in Ohio

Recycling Today reported on November 12 that American Honda plans a new auto plant in Ohio, at an estimated cost of $3 billion. Honda says it will create more than 2,000 jobs and add capacity for 240,000 vehicles a year, with production expected to start in 2029. The plant will sit on land between Honda's East Liberty and Marysville plants and will be its fourth auto plant in Ohio.
In the same report, Toyota said it will build a small utility truck in Princeton, Indiana, from the second half of 2027, backed by a $34 million investment and about 50 new jobs.
Why an auto plant matters to scrap
Recycling Today makes the scrap point plainly: auto assembly plants tend to draw follow-up investments by parts suppliers, and those suppliers generate scrap metal along with cardboard and plastic film. Our reading: stamping presses, machine shops and wire harness plants all make offcuts, and offcuts need a ride to a yard. Wire harness plants in particular turn out copper scrap, whatever the copper market is doing that week.
Keep the timing in view. Production is set for 2029, so this is a signal for the next few years, not for next week. If you work Ohio or the routes into it, it is a name to remember when shops start opening around the new plant.
Scrap tip: Small shops near a big plant are steady sources. Stop by with a clean truck, ask what they throw out and how often, and offer a set pickup day. Weigh their metal by grade at the yard, and keep the tickets so they can see what it paid.
Stainless had a good week in the East

Two stainless steel stories ran on Wednesday, November 11, and in our reading both point to busier buyers of stainless scrap in the eastern United States.
A new stainless scrap site near Pittsburgh
Recycling Today reported that NextGen Alloy Recycling, based in Latrobe, Pennsylvania, has opened a Stainless Division at a 16-acre site in West Mifflin, near Pittsburgh. The company bought the 50-year-old scrap site from Keywell Metals in September. It says the site will let it serve stainless steel and superalloy melt shops across the eastern United States. It has nine people working there now and plans for 15 next year.
A new processor that wants stainless scrap is one more door for that metal in the region. That is not a price, and it does not mean a small seller can walk in. It does mean someone in western Pennsylvania is buying.
A stainless maker back in profit
The same day, Recycling Today reported that Outokumpu, a Finnish stainless steel maker, returned to profit in the third quarter. It posted net income of 22 million euros, or $24.4 million, after a loss of 35 million euros, or $38.8 million, in the second quarter. The company's chief executive said business in the Americas was "clearly stronger," with deliveries up 7 percent from the quarter before, while Europe stayed weak.
Outokumpu runs a large mill that uses recycled content in Calvert, Alabama. Our reading: a stainless mill with stronger orders in the Americas needs more stainless scrap to melt, so this is a quiet plus for stainless sellers in the Southeast. It is one company's quarter, so treat it as a sign, not a trend.
Stainless pays only when it is clean

Stainless is easy to mix up with plain steel, and the price gap between them is wide. Most common stainless, like sinks, restaurant tables and food equipment, barely pulls a magnet. If a magnet grabs hard, it is probably plain steel or a grade your yard prices lower.
Pull the brackets, screws and rubber feet off a sink or a table before you haul it. Your yard may still pay less for dirty stainless, or class it as mixed, so ask how it grades stainless before you sort a whole pile.
Related reading: Last week's recap covered aluminum scrap costs at a big rolling mill and the September factory orders for metal products. Our scrap week recap for November 2 to 6 has those numbers to read next to this week's stainless news.
Also this week, in one line each

- Steel: Steel Market Update reported on November 12 that ferrous scrap prices rose across every grade it tracks in the November buying round, with wide gaps by region.
- Fuel: the U.S. average diesel price was $6.127 a gallon for the week of November 9, down 16.5 cents, per the Energy Information Administration.
- Remodeling: our week ahead for November 9 to 13 covered the remodeling scrap that keeps coming out of homes this fall.
What we watch next
Here is what is on the calendars, with times in Eastern Time as each agency lists them:
- Friday, November 13: producer prices for October at 8:30 a.m., per the Bureau of Labor Statistics schedule. This report carries the government's scrap price indexes for copper, aluminum and iron and steel, so it is the broadest look at scrap prices we get each month.
- Tuesday, November 17: import and export prices for October at 8:30 a.m., per the same schedule.
What it means for this week
The copper market cooled in London on Thursday, and aluminum went with it. COMEX copper swung about a dime a day early in the week and ended Wednesday near where it began. A new Honda plant is a signal for 2029, not for your next trip. Stainless had a good week in the East. None of it is a number to quote at the scale. Use it to decide who to call and what to keep sorted, and use the posted board for the price.
Scrap tip: In a choppy copper market, a quick call beats a long drive. Ask two yards for your grade by name, note the price and the time, and go where the number holds up after the trip. A few cents a pound can vanish on the drive.
Between issues, the scrap rates page shows posted prices by ZIP code, and Scraplift ranks the yards near you by what you clear after the drive.
This is general market commentary, not financial advice and not a promise. Your yard's own posted price for your grade is what you are paid. Check the date and the grade on any quote before you agree to it.
Quick answers
What happened to the copper market this week?
London copper fell 1.5 percent on November 12 to $13,610 a metric ton, after touching $13,515, its lowest since July 20, per Reuters. COMEX copper ended Wednesday near where it began the week.
Is the exchange copper price what a yard pays?
No. Exchange prices are for refined copper in big lots. Your yard pays for your grade after its own costs, and its board is your price.
Why did copper fall on Thursday?
Reuters cited soft demand, a selloff in artificial intelligence stocks and talk of a Federal Reserve rate hike that could mean further gains for the dollar.
Where is Honda building its new plant?
In Ohio, between its East Liberty and Marysville plants, per Recycling Today. Production is expected to start in 2029.